6.2L  ENGINE 1997 to current 

casting 880

      (1 piece rear main seal)         

 Click on image to see more detailed pictures

$4500 This is an engine with the minimum neccessary for us to start on the floor and make sure everything is perfect! Everything is new. 600 cfm carb. 650 or 750 spread bore is $250 extra.This engine has a cross over rather than a water pump.More bullet proof.We can change to tradittional if neccessary.Call for more info. Rated 375 hp.Comes with free engine stand.

   6.2 STROKER

 

 

---------------------------------------------------------------------------------------

 

  5.7L ( 350)VORTEC ENGINE 1997 to current 

casting 880

      (1 piece rear main seal)         

 Click on image to see more detailed pictures

$3750This is an engine with the minimum neccessary for us to start on the floor and make sure everything is perfect! Everything is new. 600 cfm carb. 650 or 750 spread bore is $250 extra.Flat top pistons.Rated 330 hp.Comes with free engine stand.

   5.7 350 Vortec 880

 

 

---------------------------------------------------------------------------------------

 
 4.3L ( 262) Complete Vortec engine

      (1 piece rear main seal)         

 Click on image to see more detailed pictures

$3750This is an engine with the minimum neccessary for us to start on the floor and make sure everything is perfect! Everything is new. Two barrel 500 cfm, or 4 barrel 600 cfm carb for $200 more. Flat top pistons.Rated 230 hp.Comes with free engine stand.

   4.3L Vortec complete

 
 
 
---------------------------------------------------------------------------------------
 
All basic complete Engines come with a free engine stand for easy moving around your shop  and  include the following parts installed:
 
Distributor   160.00
Distributor Shaft  5.00
Distributor Wires  45.82
Distributor Coil  32.20
Distributor Coil Wire  45.00
Distributor Bracket  5.00
Flywheel  116.00
Flywheel Bolts  9.00
Thermostat Housing  102.76
Thermostat Gasket    3.20
Spark Plugs x 8  36.00
Intake   247.80
Intake Bolts X 8  0.00
Expansion Plugs ½ X 4  0.00
Expansion Plugs 3/8 X 2  0.00
Water Pump  111.90
Water Pump Hose  34.25
Carburetor  330.00
Carburetor Holley Fitting  9.30
Carburetor Adapter  26.00
Oil   33.00
Oil Filter  7.50
Oil Pan   64.00
Oil Pan  Dran Plug/ Hose  33.86
Oil Pan Dip Stick  15.96
Oil Adapter  5.00
Oil Pan Dip Stick Tube  9.95
Oil Pan Rails  5.00
Timing Chain Cover  30.00
Harmonic Balancer   52.50
Harmonic  Screw  0.00
Valve Covers   56.82
Pick Up  17.87
Oil Pump Screws  0.00
Fuel Line   39.20
Fuel Line Adapter  1.97
Starter  83.00
Oil Windage Tray  5.00
Oil Windage Tray Nuts  0.00
Clamps x 2  1.00

Copyright 1998-2023 www.RapidoMarine.com